Dell Precision M20 User Manual download pdf (Page 5)

Back to Contents Page

 Flashing the BIOS

DellPrecision™M20ServiceManual



1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.



2. Insert the BIOS update program floppy or CD, and turn on the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the

computer will automatically reboot.



3. Press <F2> during POST to enter the system setup program.



4. Press <Alt> and <F> to reset the computer defaults.



5. Press <Esc Suspend>, select Save changes and reboot, and press <Enter> to save configuration changes.



6. Remove the flash BIOS update program floppy or CD from the drive and restart the computer.

Back to Contents Page



NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

1 2 3 4 5 6 7 8 9 10 ... 46 47

No comments

Dell Precision M20 User Manual Page 5