Dell Precision M2300 Troubleshooting Guide download pdf (Page 13)



4. Remove the six M2.5 x 5-mm shoulder screws from the front of the bezel.



5. Starting from the outside edge of the top of the bezel, use your fingers to push the bezel in to release the snaps. Release the sides of the bezel next by

pushing out or away from the display panel. If necessary, use a plastic scribe to release the corners of the bezel from the display panel.

Removing the Display Panel



1. Follow the instructions in Before You Begin.



2. Remove the display assembly (see Display Assembly).



3. Remove the display bezel (see Removing the Display Bezel).



4. Remove the three M2 x 3-mm screws from each side of the display panel.

screw covers/display bumpers (6)

M2.5 x 5-mm shoulder screws (6)

display bezel

display panel

top cover



NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

NOTICE: To avoid damaging the computer when replacing the display bezel, ensure that the bezel edges line up with those on the top cover, and snap

into place around the entire perimeter of the top cover.

CAUTION: Beforeyoubeginanyoftheproceduresinthissection,followthesafetyinstructionsintheDell™ Product Information Guide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

display panel

M2 x 3-mm screws (6)

top cover

display cable

bracket tabs (4)



CAUTION: To avoid damage to your display panel, handle the panel by the bracket tabs only.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Comments to this Manuals

No comments

Dell Precision M2300 Troubleshooting Guide Page 13

Comments to this Manuals

Related products and manuals for Laptops Dell Precision M2300