Dell Precision M2300 Troubleshooting Guide download pdf (Page 27)

b. Insert the card into the system board connector at a 45-degree angle, and press the card into the metal securing tabs until you feel a click.

c. Connect the antenna cables to the Mobile Broadband network card, ensuring that you route the cables correctly (see the cable routing diagram

in Removing the Display Assembly).

Subscriber Identity Module (SIM) Card



1. Follow the procedures in Before You Begin.



2. Turn the computer over.



3. With the cut-off corner on the card facing away from the card compartment, insert the SIM card into the compartment (as shown) so that it slides under

the metal bracket on the sides.

FCM (Flash Cache Module)

The FCM, or Flash Cache Module, is an internal flash drive that helps improve the performance of your computer.

Mobile Broadband network card

antenna cables (2)



NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband

network card.

CAUTION: Beforeyoubeginanyoftheproceduresinthissection,followthesafetyinstructionsintheDell™ProductInformationGuide.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface, such as a connector on the back of the computer.

SIM card

metal brackets (2)



NOTICE: Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before

you insert or remove the card.

NOTE: ThiscardisonlycompatiblewiththeMicrosoftWindowsVista™operatingsystem.