Dell Precision M70 User Manual download pdf (Page 17)

Display Bezel



1. Follow the instructions in "Preparing to Work Inside the Computer."



2. Remove the display assembly.



3. Use a plastic scribe to pry the six round display bumpers out of the screw holes located on the front of the bezel. Do not remove the oval bumpers.



4. Remove the six M2.5 x 5-mm screws located on the front of the bezel under the bumpers.



5. Separate the bezel from the top cover by lifting the inside edge of the bezel away from the top cover.

Pull the bezel from the top edge toward the center of the panel to open the snaps. Push the bezel on the sides and bottom away from the center of the

panel to open the snaps.

display

pull-tab

display cable connector

antenna cable

computer base

system board connector

for display cable

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

NOTE: You may need to use a plastic scribe to begin the separation.

NOTICE: Toavoiddamagingthebezel,startpullingthebezelupnearthebottomofthedisplay(neartheDELL™logo)andworkaroundthedisplay

and toward the latch release.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Comments to this Manuals

No comments

Dell Precision M70 User Manual Page 17

Comments to this Manuals

Related products and manuals for Laptops Dell Precision M70