If you ordered an FCM card with your computer, the card is already installed.
Removing the FCM
1. Follow the procedures in Before You Begin.
2. Remove the hinge cover and keyboard. See Removing the Hinge Cover and Removing the Keyboard.
3. Ground yourself by touching one of the metal connectors on the back of the computer.
4. Release the FCM by pushing the metal securing tab away from the card until the card pops up slightly.
5. Slide the FCM at a 45-degree angle out of its connector.
Replacing the FCM
1. Insert the FCM connector at a 45-degree angle into the system board connector labeled "FCM" either in the WLAN or WWAN card compartment.
2. Press the other end of the FCM down into the slot on the system board until the card clicks into place.
Back to Contents Page
Comments to this Manuals