Dell U2414H Monitor User Manual download pdf (Page 28)

28 | Setting Up the Monitor

Connecting the USB 3.0 cable

After you have completed connecting the Mini-DP to DP/DP/HDMI cable, follow the

procedures below to connect the USB 3.0 cable to the computer and complete your

monitor setup:

1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port

on your computer. (See

Bottom View

for details.)

2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.

3. Plug the power cables for your computer and monitor into a nearby outlet.

4. Turn On the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not display an

image, see

Universal Serial Bus (USB) Specific Problems

5. Use the cable slot on the monitor stand to organize the cables.

Using the (MHL) Mobile-High Definition Link

NOTE: This monitor is MHL certified.

NOTE: To use the MHL function, use only MHL certified cable and source devices

that support MHL output.

NOTE: Some MHL source devices may take more than a few seconds or longer to

output an image, depending on MHL source devices.

NOTE: When the connected MHL source device enters Standby mode, the monitor

will display black screen or show the massage below, depending on MHL source

device's output.

To enable MHL connection, please perform the below steps:

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 62 63

No comments

Dell U2414H Monitor User Manual Page 28