15
Open Manage Network Manager – Release Notes
• No support for firmware v4.1.x or greater on the following devices: PC8024,
PCM6220, PCM6348, PCM8024
• PowerConnect 62xx users must be running 3.x.x.x firmware (or later) on
their switch before they can do a standard firmware upgrade. Attempting to
upgrade the firmware while at version 2.x or 1.x fails. To upgrade from these
versions, see the special instructions provided in the Release Notes and
Readme for the firmware itself. (8507)
• OpenManage Network Manager receives all data from the Dell 62xx device,
but if the Last Update day is more than a single digit, then the entire data
table disappears, and OpenManage Network Manager displays a Form Error.
One other symptom: the Last Update, Total Inserts, Total Deletes, Total
Drops, and Total Ageouts do not appear correct, as they are in the CLI.
Workaround: Rebooting switch sets the Last Update back to zero. Once done,
the LLDP Stats works again. (8213)
• Cable Tests on ports in a stack may fail, producing the message
Test has not
been preformed
. Workaround: Make sure the management (master) switch
is set to Unit-1 in the stack. (8129)
• Some discrete configuration (Resource editor) screens do not appear or are
inoperable in Web client. Workaround: Use the Java client. (7110)
• Stacked switches change IP addresses when the master is moved. Moving
master does not function properly in stack configuration. (7002)
• When editing any interface set to disabled mode, and choosing vlan tagging
from the combo box, you will not be able to add a VLAN ID. The field is
grayed out. Workaround: Switch the selection to another item and then back
to the desired one. (6355)
• For PowerConnect 62xx series devices, Editing Managed Equipment does not
display the correct values for Power over Ethernet (PoE) Port Settings parame-
ters. Workaround: Use the PowerConnect 62xx command line interface or
Web Console to view Power over Ethernet (PoE) Port Setting parameters.
(13107)
• You must use the command-line interface to deploy new firmware for the
5324 model (4739)
• LLDP modification through this application may not work on M8024
devices, therefore you must setup LLDP through the telnet CLI. (2583)
• When one of the three banners already configured on a 35xx or 54xx device
is longer than 500 characters, you must modify that banner in OpenManage
Network Manager before you can create a different banner. (2411)
• If directory locks during upgrade, check task manager and close all
ftp.exe
processes.(2455)
• Web client does npt show IPv6 information when older firmware is installed
on the switch. (2967)
• OSPF Areas cannot be deleted for M6220 devices. (44464)
• 35xx models do not support rfc 1042 and IIec, even though these frame types
appear in the screen that includes Vlan protocol group. Currently when you
select these options in Group ops and execute a group operation against a
35xx model device, an error message appears. (6268)
(62 pages)
(190 pages)
(320 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals