Dell PowerEdge R815 Specifications Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Dell
Dell PowerEdge R815 Technical Guide
23
4.8 Acoustics
The acoustical design of the PowerEdge R815 reflects adherence to Dell‘s high sound
quality standards. Sound quality is different from sound power level and sound
pressure level in that it describes how humans respond to annoyances in sound, like
whistles, hums, etc. One of the sound quality metrics in the Dell specification is
prominence ratio of a tone as shown in Table 6.
Table 6. Acoustical Performance for 4-Socket Configuration
4-Socket Configuration @ 23 ± 2 °C
Operating
Mode
L
WA
-
UL
(Bels)
L
pA
(dBA)
Prominent
Tones
CPU
HDD
RAID
DIMM
4x 6400 MT
4x 15 krpm
SAS
PERC
H700
32x
4GB
DDR3
Idle
5.6
41
None
SPEC 50%
5.6
41
None
HDD
active
5.6
41
None
Definitions
Idle: Reference ISO7779 (1999) definition 3.1.7; system is running in its OS but no
other specific activity.
Stressed Processor: An operating mode per ISO7779 (1999) definition 3.1.6. The
software SPECPower_ssj2008 is utilized to stress the processors. SPECPower is set to
50% loading.
HDD Active: An operating mode per ISO7779 (1999) definition 3.1.6. The software
IOMeter is utilized to stress the installed HDDs. IOMeter is running ECMA-74 active
mode.
LwA UL: The upper limit sound power level (LwA) calculated per section 4.4.2 of ISO
9296 (1988) and measured in accordance to ISO 7779 (1999).
LpA: Average bystander A-Weighted sound pressure level. The system is placed in a
rack with its bottom at 25 cm from the floor. The acoustic transducers are at the four
bystander positions, ref ISO7779 (1999) Section 8.6.2.
Prominent tone: Criteria of D.5 and D.8 of ECMA-74 9th ed. (2005) are followed to
determine if discrete tones are prominent. The system is placed in a rack with its
bottom at 75 cm from the floor. The acoustic transducer is at front bystander position,
ref ISO7779 (1999) Section 8.6.2.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 58 59

Comments to this Manuals

No comments