Dell OptiPlex GX400 User's Guide download pdf (Page 11)

Back to Contents Page  
Disk Drives and Media  
Dell™OptiPlex™GX400ServiceManual 
Drive Location  
Removing the Floppy Drive  
Replacing the Floppy Drive  
Removing a CD, Zip, or Other External Drive  
Replacing a CD, Zip, or Other External Drive  
Removing a Hard Drive  
Replacing a Hard Drive  
 
Drive Location  
Drive Locations  

  
Removing the Floppy Drive  
1. Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.  
 
2. Rotate the power supply away from the system board.  
 
3. Remove the front panel.  
 
4. Disconnect the DC power and interface cables from the back of the drive.  
 
 
CAUTION: Before you perform this procedure, see "Precautionary Measures." 
NOTICE: Before disconnecting a device from the computer or removing a component from the system board, verify that the standby power light on the system 
board has turned off. To locate this light, see "System Board Components." 