Dell GX1 User Manual download pdf (Page 43)

Using the System Setup Program 2-9

3DVVZRUG6WDWXV

When Setup Password is set to Enabled, Password Status allows you to prevent the

system password from being changed or disabled at system start-up.

To lock the system password, you must first assign a setup password in the Setup

Password option and then change the Password Status option to Locked. In this state,

the system password cannot be changed through the System

Password option and

cannot be disabled at system start-up by pressing <Ctrl><Enter>.

To unlock the system password, you must enter the setup password in the Setup

Password option and then change the Password Status option to Unlocked. In this

state, the system password can be disabled at system start-up by pressing

<Ctrl><Enter> and then changed through the System Password option.

%RRW6HTXHQFH

Boot Sequence

can be set to Diskette First (the default option), Hard Disk Only,

CD-ROM First, or Device List.

The term

boot

refers to the system’s start-up procedure. When turned on, the

system “bootstraps” itself into an operational state by loading into memory a

small program, which in turn loads the necessary operating system. Boot

Sequence

tells the system where to look for the files that it needs to load.

'LVNHWWH)LUVW

Selecting Diskette First causes the system to try booting from drive A first. If the

system finds a diskette that is not bootable in the drive or finds a problem with

the drive itself, it displays an error message. If it does not find a diskette in the

drive, the system tries to boot from the hard-disk drive (drive 0), then from the

CD-ROM drive, and finally from the Plug and Play network adapters in the order

found.

+DUG'LVN2QO\



Selecting Hard Disk Only

causes the system to attempt to boot first from the hard-

disk drive and then from the Plug and Play network adapters in the order found.

&'520)LUVW

Selecting CD-ROM First causes the system to try booting from the CD-ROM drive

first. If the system finds a CD that is not bootable in the drive or finds a problem

with the drive itself, it displays an error message. If it does not find a CD in the

drive, the system tries to boot from drive A, then from drive C, and finally from

the Plug and Play network adapters in the order found.

'HYLFH/LVW

Device List provides access to the Device List screen where you can choose from a list

of available boot devices to boot from and specify the order in which your computer

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 173 174

Comments to this Manuals

No comments

Dell GX1 User Manual Page 43

Comments to this Manuals

Related products and manuals for Graphics cards Dell GX1