Dell POWEREDGE R710 User Manual download pdf (Page 150)

150 Installing System Components

Figure 3-36. System Board Removal

Installing the System Board

Unpack the new system board and remove the label placard that is inserted

in the memory module socket.

Remove the labels from the placard and affix them to the information tag

on the front of the system. See Figure 1-1.

Transfer the processors and heat sinks to the new system board. See

"Removing a Processor."

Remove the memory modules and transfer them to the same locations on

the new board. See "Removing Memory Modules" and "Installing Memory

Modules."

Install the new system board:

Angle the system board as you lower it into the chassis and set the

board flat inside the chassis.

Maneuver the system board so that all of the retention hooks on the

chassis are inserted into the retention slots on the system board.

1 system-board tray riser release pin 2 system board

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 207 208

No comments

Dell POWEREDGE R710 User Manual Page 150