
64 Camera Module
11
Turn the camera module over and disconnect the camera cable from the
connector on the camera module.
12
Remove the camera module.
Replacing the Camera Module
1
Follow the procedures in "Before You Begin" on page 9.
2
Connect the camera cable to the connector on the camera module.
3
Turn the camera module over and slide the notch on the camera module
into the slot on the display cover.
4
Replace the two screws that secure the camera module to the display cover.
5
Replace the display panel (see "Replacing the Display Panel" on page 54).
6
Replace the inverter board (see "Replacing the Inverter Board" on page 60).
7
Replace the display bezel (see "Replacing the Display Bezel" on page 52).
1 screws (2) 2 camera module
Comments to this Manuals