Installing the WiFi-Switch Board
1. Place the WiFi-switch board in its slot.
2. Tighten the screws to secure the WiFi-switch board to the computer.
3. Connect the WiFi-switch board cable to the system board.
4. Install:
a) palmrest assembly
b) base cover
c) base corner caps
d) display-hinge cap
e) optical drive
f) hard drive
g) keyboard
h) keyboard trim
i) battery
j) ExpressCard
k) SD Card
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the System Board
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD Card
b) ExpressCard
c) battery
d) keyboard trim
e) keyboard
f) hard drive
g) optical drive
h) display-hinge cover
i) base cover
j) base corner caps
k) power connector
l) coin-cell battery
m) memory
n) WLAN card
o) WWAN card
p) heatsink assembly
q) processor
r) palmrest assembly
s) ExpressCard cage
3. Disconnect the coin-cell battery and the speaker cables from the system board.
33
Comments to this Manuals