Dell Inspiron 2000 Specifications download pdf (Page 135)

Display Assembly and Display Latch: Dell Inspiron 2600 and 2650

1 pull tabs

2 inverter connector on

system board

3 bottom flex-cable

connector

10. Pull the top flex-cable connector down and away to remove it from the display panel

connector.

Replacing the 15-Inch Display Panel

1. Reconnect the top flex-cable connector to the display panel connector.

2. Reconnect the bottom flex-cable connector to the inverter connector on the system board.

3. Replace the tape that secures the display panel connector and the tape that secures the

middle of the display-feed flex cable to the display panel.

4. Place the bottom edge of the display panel in the bottom of the top cover and elevate the

top of the panel with your hand.

5. Lay the display panel in the top cover.

6. Reinstall the eight M2 x 3-mm screws that secure the display panel to the top cover.

7. Reinstall the M2.5 x 5-mm screw that secures the display-feed flex cable to the display

assembly.

Display Latch

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and

remove any installed battery.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching

an unpainted metal surface on the computer.

Removing the Display Latch

1. Remove the keyboard.

file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/display.htm (12 of 14) [2/28/2004 6:52:43 AM]

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 154 155

No comments

Dell Inspiron 2000 Specifications Page 135