Dell Inspiron M5010 Setup Guide download pdf (Page 32)



2. Align the notch in the memory module with the tab in the memory-module connector.



3. Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear

the click, remove the memory module and reinstall it.



4. Replace the base cover (see Replacing the Base Cover).



5. Replace the battery (see Replacing the Battery), or connect the AC adapter to your computer and an electrical outlet.



6. Turn on the computer.

As the computer boots, it detects the memory module(s) and automatically updates the system configuration information.

To confirm the amount of memory installed in the computer:

Windows Vista

Click Start ® Help and Support® Dell System Information.

Windows

Click Start ® Control Panel® System and Security® System.

Back to Contents Page



NOTE: If the memory module is not installed properly, the computer may not boot.

tab

notch

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 50 51

Comments to this Manuals

No comments

Dell Inspiron M5010 Setup Guide Page 32

Comments to this Manuals

Related products and manuals for Laptops Dell Inspiron M5010