Dell Inspiron X200 User Manual download pdf (Page 18)

Back to Contents Page

Modem Daughter Card

Dell™X200ServiceManual

Removing the Modem Daughter Card

1. Remove the battery.

2. Remove the keyboard.

3. Remove the palm rest.

4. Remove the hinge covers.

5. Remove the display assembly.

6. Remove the keyboard tray.

7. Remove the hard drive.

8. Remove the system board.

9. Turn the system board over, and remove the M2 x 4-mm screw that secures the modem daughter card to the system board.

10. Use the pull tab to pull the modem daughter card straight up out of its connector.

11. Disconnect the modem cable from the modem daughter card.

Replacing the Modem Daughter Card

1. Connect the modem cable to the modem.

2. Align the modem with the screw hole and press the modem into the connector on the system board.

3. Use the screw hole to align the card, and press the card into its connector on the system board.

4. Install the M2 x 4-mm screw that secures the modem to the system board.

Back to Contents Page

NOTICE: Disconnect the computer and any attached devices from electrical outlets.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

NOTICE: Do not pull on the modem cable. Pull from the modem connector to disconnect the cable.

modem daughter card

modem connector

modem cable

pull tab

M2 x 4-mm screw

NOTICE: The connectors are keyed for correct insertion; do not force the connections.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

Dell Inspiron X200 User Manual Page 18