Dell Inspiron X200 User Manual download pdf (Page 33)

Replacing the Memory Module

1. Ground yourself and install the new memory module:

a. Align the notch in the module with the slot in the center of the connector.

b. Slide the edge of the module firmly into the connector, and rotate the module down until you hear a click. If you do not hear the click, remove the

module and reinstall it.

2. Replace the memory module cover and tighten the captive screw.

3. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.

4. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.

Mini PCI Card

Removing the Mini PCI Card Cover

1. If the computer is docked, undock it.

2. Turn the computer over, loosen the captive screw from the Mini PCI card cover, and lift the cover.

securing clips (2)

NOTE: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure.

NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

captive screw

memory module cover

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1 2 ... 28 29 30 31 32 33 34

Comments to this Manuals

No comments

Dell Inspiron X200 User Manual Page 33

Comments to this Manuals

Related products and manuals for Laptops Dell Inspiron X200