102 omconfig: Managing Components Using the Instrumentation Service
omconfig chassis frontpanel/omconfig mainsystem frontpanel
Use the omconfig chassis frontpanel or omconfig mainsystem frontpanel
command to:
• configure the power button and the Nonmasking Interrupt (NMI) button
• configure the LCD to display:
• no information
• custom information
• default system information
• service tag, system name
• MAC addresses of iDRAC6
• system power
• IP address of iDRAC6
• ambient temperature of the system
• IPv4 address of iDRAC6
• IPv6 address of iDRAC6
• specify and configure the LCD line number
• view the security state report of the LCD
• configure LCD to indicate an active remote session when the
K
ernel-based
V
irtual
M
achine (KVM) is available
NOTE: You can configure the Power and NMI buttons only if they are present on
your system.
Table 4-6 shows the valid parameters for the command.
Table 4-6. omconfig chassis frontpanel/omconfig mainsystem frontpanel
name=value pair 1 name=value pair 2 Description
lcdindex=
<index>
NA Specifies the LCD line number.
config=none |
default | custom
NA none: Sets the LCD text to none.
default: Sets the LCD text to default.
custom: Sets the LCD text to custom.
text=<custom
text>
NA Sets the custom text for LCD when config=
custom.
Comments to this Manuals