Dell OpenManage Server Administrator Version 6.1 User Manual download pdf (Page 220)

220 Using the Storage Management Service

Example for SAS Controllers

To bring the physical disk described in this example back online, enter:

omconfig storage pdisk action=online controller=1

pdisk=0:2:3

omconfig Assign Global Hot Spare

Use the following omconfig command syntax to assign a physical disk as a

global hot spare.

Complete Syntax

omconfig storage pdisk action=assignglobalhotspare

controller=id pdisk=<PDISKID> assign=yes

where id is the controller ID. The <PDISK> variable specifies the

physical disk.

To obtain these values, enter omreport storage controller to display the

controller IDs and then enter omreport storage pdisk controller=ID to

display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to assign physical disk 3 on connector 0 of

controller 1 as a global hot spare. On a SAS controller, the physical disk

resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers

To assign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:3 assign=yes

Example for SAS Controllers

To assign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:2:3 assign=yes

1 2 ... 215 216 217 218 219 220 221 222 223 224 225 ... 297 298

No comments

Dell OpenManage Server Administrator Version 6.1 User Manual Page 220