Dell GX520 - OptiPlex - 512 MB RAM User's Guide download pdf (Page 96)

Back to Contents Page

Dell™OptiPlex™GX520User'sGuide

I/O Panel

I/O Panel



Removing the I/O Panel



1. Follow the procedures in "Before You Begin."



2. Remove the screw that secures the I/O panel. Press on the release button and pull on the loop to slide the card away from the computer.



3. Disconnect all of the cables from the I/O panel, and remove the panel from the computer.



Replacing the I/O Panel



1. To replace the I/O panel, follow the removal procedure in the reverse order.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable

routing clips.

I/O panel release button

securing screw

I/O panel

I/O cable connector

I/O cable connector pull-

loop

NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat the

panel.

1 ... 95 96 97 ... 229

No comments

Dell GX520 - OptiPlex - 512 MB RAM User's Guide Page 96