Dell C1765NF MFP Laser Printer User Manual download pdf (Page 119)

Dell™ Printer Configuration Web Tool 117

Fax Settings

Purpose:

To configure the basic fax settings.

NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Va l ue s:

Receive Mode Telephone Automatic fax reception is turned off. You can receive a fax by picking up the

handset of the external telephone, and then pressing the remote receive code.

Fax* Automatically receives faxes.

Telephone/Fax When the printer receives an incoming fax, the external telephone rings for the

time specified in Auto Receive Fax/Tel, and then the printer automatically

receives a fax. If an incoming call is not a fax, the printer beeps from the internal

speaker indicating that the call is a telephone call.

Answer

Machine/

Fax

The printer can share a telephone line with an answering machine. In this mode,

the printer will monitor the fax signal and pick up the line if there are fax tones.

If the phone communication is using serial transmission in your country (such as

Germany, Sweden, Denmark, Austria, Belgium, Italy, France and Switzerland),

this mode is not supported.

DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a

distinctive ring service must be installed on your telephone line by the telephone

company. After the telephone company has provided a separate number for

faxing with a distinctive ring pattern, configure the fax setup to monitor for that

specific ring pattern.

Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode after receiving an incoming

call.

Auto Receive Tel/Fax Sets the interval at which the printer goes into the fax receive mode after the external telephone

receives an incoming call.

Auto Receive Answer/Fax Sets the interval at which the printer goes into the fax receive mode after the external answering

machine receives an incoming call.

Line Monitor Sets the volume of the line monitor, which audibly monitors a transmission through the internal

speaker until a connection is made.

Ring Tone Volume Sets the volume of the ring tone, which indicates that an incoming call is a telephone call through

the internal speaker when Receive Mode is set to Teleph on e/ Fax.

Line Type Sets the line type.

Tone/Pulse Sets the dialing type.

Resend Delay Specifies the interval between transmission attempts.

Redial Attempts Specifies the number of redial attempts to make when the destination fax number is busy. If you

enter 0, the printer will not redial.

Redial Delay Specifies the interval between redial attempts.

Junk Fax Setup Sets whether to reject faxes sent from unwanted numbers by accepting faxes only from the fax

numbers registered in the Phone Book.

Remote Receive Sets whether to receive a fax by pressing a remote receive code on the external telephone.

Remote Receive Tone Specifies the remote receive code in two digits to start Remote Receive.

Fax Header Sets whether to print the information of sender on the header of faxes.

Fax Header Name Sets the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters

can be entered.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 375 376

Comments to this Manuals

No comments

Dell C1765NF MFP Laser Printer User Manual Page 119

Comments to this Manuals

Related products and manuals for Printers Dell C1765NF MFP Laser Printer