Dell PowerEdge 2450 User Manual download pdf (Page 55)

support.dell.com Checking Inside the Computer 7-5

 

4. Locate the expansion-card cage securing lever (see Figure 7-3). Rotate the lever

upward until it stops in an upright position.

5. Lift the expansion-card cage up and away from the chassis.



To replace the expansion-card cage, perform the following steps:

1. With the securing lever in the upright position, lower the expansion-card cage

into place until it is aligned.

2. Rotate the securing lever downward until it is flush with the top of the chassis.

Make sure the riser board is fully seated in the RISER connector on the system

board.

3. Reconnect any cables you removed in step 3 of the previous procedure, “Remov-

ing the Expansion-Card Cage.”

"

In Figure 7-4, the computer doors are opened to provide an interior view. Refer to this

illustration to locate interior features and components discussed later in this guide.

securing lever

expansion-card cage

power LED

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 165 166

No comments

Dell PowerEdge 2450 User Manual Page 55