Dell POWERVAULT MD3620I User Manual download pdf (Page 19)

Getting Started With Your System

Technical Specifications

Drives

PowerVault MD3600i Up to twelve 3.5-inch SAS hot-swappable

hard drives (3.0 Gbps and 6.0 Gbps)

PowerVault MD3620i Up to twenty four 2.5-inch SAS

hot-swappable hard drives (3.0 Gbps and

6.0 Gbps)

RAID Controller Modules

RAID controller modules

• One or two hot-swappable modules

with temperature sensors

• 2 GB of cache per controller

Back-Panel Connectors (Per RAID Controller Module)

iSCSI connectors Two 10 GB iSCSI IN connectors to

connect hosts

SAS expansion connector One SAS OUT port for expansion to an

additional PowerVault MD1200 series

enclosure.

NOTE:

SAS connectors are SFF-8088 compliant.

Serial connector One 6-pin mini-DIN connector

NOTE:

For technical support use only.

Management Ethernet connector One 100/1000 Base-T port Ethernet for

out-of-band management of the enclosure

NOTE:

The default management port IP

addresses for the primary and secondary RAID

controller modules are 192.168.128.101 and

192.168.128.102, respectively. By default, the

management ports are set to Dynamic Host

Configuration Protocol (DHCP). If the controller

is unable to get an IP address configuration

from a DHCP server within a specified time out

period (approximately 3 minutes), it defaults

back to static IP addressing. For more

information, see the Deployment Guide.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 221 222

No comments

Dell POWERVAULT MD3620I User Manual Page 19