Dell PERC 4/SC User Manual

Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallation Guide Overview Installing the Windows Driver Installing Red Hat Linux Driver

26. Click Next. When Windows has finished installing the driver, the Completing the Found New Hardware Wizard window appears. 27. Click Finish.

1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controlle

1. Shut down and turn off the system as well as all peripherals attached to the system. 2. Remove the system cover. See the system Installation

7. Repeat steps 2 through 6 for each logical drive. Back to Contents Page 

Back to Contents Page Installing Red Hat Linux Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing

2. At the command prompt, type:  expert noprobe dd 3. When the install prompts for a driver diskette, insert the diskette and press <Enter>

Back to Contents Page Installing the Novell NetWare Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Instal

If you select the option Discover and load an additional driver, the system detects the extra unit. Perform step 4 to complete the procedure. 4. At

A list of CDM drivers displays. 6. Select LOAD PEDGE3.HAM SLOT=XXXX. 7. Before you exit the list of CDM drivers, press <Alt> <V> to s

6. Under the Additional Driver Actions menu, press the down arrow key to select the Additional Driver option, then press <Enter>. 7. Press

Back to Contents Page Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Back to Contents Page 

2. Once NetWare begins to boot, the following message displays: Press ESC to abort OS boot. 3. Press <Esc>. 4. At the command prompt, typ

If PERC 2/SC and PERC 2/DC are also installed in the system, the MEGA4_XX.HAM driver loads for AMI MegaRAID i960Rx Adapter. You MUST remove all of t

Back to Contents Page Overview Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Obtaining Drivers The DellTM Cos

Back to Contents Page Installing the Windows Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing a

5. Insert the Dell OpenManage Systems Management CD or Server Support CD in the CD drive and restart the server. 6. Select the language that you w

b. To obtain the drivers from Dell Support, go to support.dell.com and download the latest drivers for your controller to a diskette, then skip to st

A list of all currently installed SCSI adapter drivers displays on the tab. 5. Select the PERC Adapters driver and click Remove. The Remove Driv

A Remove Driver dialog box appears. 5. Click Yes to complete the removal. The Drivers tab displays a list of all currently installed SCSI drivers.

The Update Device Driver Wizard appears. 8. Click Next. 9. Click Display a list of known drivers for this device so I can choose a specific driver