Dell PERC 4/SC User Manual download pdf (Page 6)

b. To obtain the drivers from Dell Support, go to support.dell.com and download the latest drivers for your controller to a diskette, then skip to

step7.

2. Click Copy Drivers.

3. Select a server from the Select Server drop-down menu, and then select the operating system under Select Drivers/Utilities Set.

4. Click Continue.

5. On the Utilities and Drivers page, scroll to the box for the operating system on the server and click the driver for your type of RAID controller.

6. Follow the instructions on the screen and unzip the file to the diskette.

7. Insert the diskette into the diskette drive of the system for which you want to update drivers.



Updating the Driver

1. Press Start—> Settings—> Control Panel—> System.



The System Properties screen displays.



2. Click the Hardware tab.

3. Click the Device Manager.



The Device Manager screen displays.

4. Click SCSI and RAID Controllers.

5. Double-click the RAID controller for which you want to update the driver.

6. Click the Driver tab and click Update Driver.



The screen for the Upgrade Device Driver Wizard displays. The Wizard helps you update the driver for the hardware device.

7. Follow the steps in the Wizard to search the diskette for the driver.

8. Select the INF file from the diskette.



9. Click Next and continue the installation steps in the Wizard.



Installing PERC 4/DC or PERC 4/SC Controllers in Windows NT 4.0 Systems With

PERC 3/SC, 3/DCL, or PERC 3/DC



The PERC 4/DC driver for Windows NT 4.0 is compatible with PERC 3/DC, PERC 3/DCL, and PERC 3/SC controllers. However, to ensure proper system operation,

you must uninstall the existing PERC driver and install the PERC 4 driver before you install a PERC 4/DC controller.



The PERC 4/DC driver runs all of the PERC 3/DC, PERC 3/DCL and PERC 3/SC controllers in the system. To remove the PERC 3 driver and install the PERC 4/DC

or PERC 4/SC driver and controller(s), perform the following steps:

1. Log on as an administrator.

2. From the Windows Start menu, point to Settings, then click Control Panel.



The Control Panel window opens.

3. Double-click SCSI Adapters.



The SCSI Adapters window opens.

4. Click the Drivers tab.

NOTE: In Windows 2003, press Start—> Control Panel—> System.

NOTE: In Windows 2003, select the name of the driver, not the INF file.