Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallation Guide Overview Installing the Windows Driver Installing Red Hat Linux Driver
26. Click Next. When Windows has finished installing the driver, the Completing the Found New Hardware Wizard window appears. 27. Click Finish.
1. From the desktop, right-click the My Computer icon. 2. Left-click Manage. 3. Click Device Manage. 4. Double-click SCSI and RAID Controlle
1. Shut down and turn off the system as well as all peripherals attached to the system. 2. Remove the system cover. See the system Installation
7. Repeat steps 2 through 6 for each logical drive. Back to Contents Page
Back to Contents Page Installing Red Hat Linux Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing
2. At the command prompt, type: expert noprobe dd 3. When the install prompts for a driver diskette, insert the diskette and press <Enter>
Back to Contents Page Installing the Novell NetWare Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Instal
If you select the option Discover and load an additional driver, the system detects the extra unit. Perform step 4 to complete the procedure. 4. At
A list of CDM drivers displays. 6. Select LOAD PEDGE3.HAM SLOT=XXXX. 7. Before you exit the list of CDM drivers, press <Alt> <V> to s
6. Under the Additional Driver Actions menu, press the down arrow key to select the Additional Driver option, then press <Enter>. 7. Press
Back to Contents Page Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Back to Contents Page
2. Once NetWare begins to boot, the following message displays: Press ESC to abort OS boot. 3. Press <Esc>. 4. At the command prompt, typ
If PERC 2/SC and PERC 2/DC are also installed in the system, the MEGA4_XX.HAM driver loads for AMI MegaRAID i960Rx Adapter. You MUST remove all of t
Back to Contents Page Overview Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Obtaining Drivers The DellTM Cos
Back to Contents Page Installing the Windows Driver Dell™CERCandPERCRAIDControllersOperatingSystemDriverInstallationGuide Installing a
5. Insert the Dell OpenManage Systems Management CD or Server Support CD in the CD drive and restart the server. 6. Select the language that you w
b. To obtain the drivers from Dell Support, go to support.dell.com and download the latest drivers for your controller to a diskette, then skip to st
A list of all currently installed SCSI adapter drivers displays on the tab. 5. Select the PERC Adapters driver and click Remove. The Remove Driv
A Remove Driver dialog box appears. 5. Click Yes to complete the removal. The Drivers tab displays a list of all currently installed SCSI drivers.
The Update Device Driver Wizard appears. 8. Click Next. 9. Click Display a list of known drivers for this device so I can choose a specific driver
Comments to this Manuals