Dell PowerVault 124T User Manual download pdf (Page 43)

To Set Network Configuration:

1. To change the values of the subnet mask, gateway, Simple Network Management Protocol (SNMP) server, or the time server, type in the new address,

using the <Tab> key to move from box to box.

2. Click submit.



Setting Front Panel Security Options

When you enable the security option, users must enter a password to access the autoloader's front panel functionality. A password allows either

administrator-level access or operator-level access (see "Setting Security"). Up to two Admin and two Operator passwords may be set. To set security:

1. From any page, click the Configuration heading. The Configuration screen displays.

2. On the left-hand side of the screen, click Security. The System Security section of the screen displays.

3. To enable front panel security, select the check box next to Front Panel Security Enabled.

If the check box is blank, the security option for the front LCD panel is not enabled.

4. Click submit.

To reset the front panel password:

1. From any page, click the Configuration heading. The Configuration screen displays.

2. On the left-hand side of the screen, click Security.

3. Select the check box next to Reset Front Panel Password. A check mark appears.

4. Click submit.

To set User Administration:

1. From any page, click the Configuration heading. The Configuration screen displays.

2. On the left-hand side of the screen, click Security.

3. From the drop-down list next to Select User Type, select Operator 1, Operator 2, Administrator 1 or Administrator 2.

4. In the Username field, enter a user name.

5. In the Password field, enter the new password.

6. In the Verify Password field, re-enter the same new password.

7. Click submit.

To set the Client Authorization Control:

1. From any page, click the Configuration heading. The Configuration screen displays.

2. On the left-hand side of the screen, click Security.

Scroll to Client Authorization Control

. In this section is a list of the IP addresses that are authorized to perform with the RMU for this specific unit. There

are two sets of IP address boxes. You can individually enable/disable and configure each set.

¡ If enabled, each set can be used to specify either a range of IP addresses or a pair of specific IP addresses that are allowed to administer this

unit. A set can also be used to specify a single IP address if the desired IP address is entered into both the "a" and "b" portions of the set. When

a set is used to specify a range of IP addresses, the "b" portion of each address set must be greater than or equal to the "a" portion of that

address set.

¡ If neither set is enabled, any IP client can administer the unit. If a single set is enabled, only clients that pass the test specified by that set are

allowed administrator access. If both sets are enabled, any client that passes either of the two filter tests can administer the unit.

The Web server always allows any client to view the status information of the unit, regardless of the authorized client list or the overlap control policy.

3. Use the drop-down box to select Enable or Disabled.

4. Type the IP addresses in the appropriate boxes.

5. Click submit to save.

Client Overlap Control is a management policy on controlling how the Web server handles overlapping control requests from multiple clients on the

authorized client list. The options include No Locking, Full Locking, and Time-Based Locking.

l No Locking allows multiple clients to have unrestricted access to control the system as long as they are on the authorized client list.

NOTE: To view the list of currently defined users, click submit with Select User Type chosen.

NOTE: By entering an improper range of IP addresses, a user can possibly lock out all IP clients from administering the autoloader. If this

occurs, the user can restore the default values by running Restore Default from the front panel Configuration menu.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 64 65

Comments to this Manuals

No comments

Dell PowerVault 124T User Manual Page 43

Comments to this Manuals

Related products and manuals for Computer hardware Dell PowerVault 124T