12. Disconnect the left and right speakers from their system board connectors.
13. Remove the reserve battery.
14. Disconnect the Bluetooth cablefromthesystemboard,ifaBluetooth™deviceispresent.
15. Lift the ZIF connector, and remove the status light (LED) cable from its ZIF connector on the system board.
16. Lift the system board up, from the right side, and out of the bottom case.
Replacing the System Board
1. Place the system board in the bottom case.
2. Reconnect all the cables to the system board ZIF connectors.
3. Reinstall the three M2 x 4-mm screws that secure the system board to the bottom case.
Back to Contents Page
Comments to this Manuals