Dell Inspiron M5010 Setup Guide download pdf (Page 33)

Back to Contents Page

 Middle Cover

Dell™Inspiron™N5010/M5010ServiceManual

Removing the Middle Cover

Replacing the Middle Cover



Removing the Middle Cover



1. Follow the instructions in Before You Begin.



2. Remove the battery (see Removing the Battery).



3. Remove the base cover (see Removing the Base Cover).



4. Remove memory module(s) (see Removing the Memory Module(s)).



5. Remove the optical drive (see Removing the Optical Drive).



6. Remove the keyboard (see Removing the Keyboard).



7. Remove the palm rest (see Removing the Palm Rest).



8. Remove the Mini-Card (see Removing the Mini-Card).



9. Remove the display assembly (see Removing the Display Assembly).



10. Turn the computer over and remove the two rubber caps that cover the screws.



11. Remove the four screws that secure the middle cover to the computer base.



12. Release the tabs that secure the middle cover to the computer base.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 50 51

No comments

Dell Inspiron M5010 Setup Guide Page 33