Back to Contents Page
Camera Module (Optional)
Dell™Inspiron™17ServiceManual
Removing the Camera Module
Replacing the Camera Module
Removing the Camera Module
1. Follow the procedures in Before You Begin.
2. Remove the display assembly (see Removing the Display Assembly).
3. Remove the display bezel (see Removing the Display Bezel).
4. Disconnect the camera cable from the connector on the camera module.
5. Lift the tape on top of the camera module.
6. Release the camera module from the latches on the display cover.
7. Remove the camera module.
Replacing the Camera Module
1. Follow the procedures in Before You Begin.
2. Secure the camera module using the latches on the display cover.
3. Connect the camera cable to the connector on the camera module.
4. Replace the tape on top of the camera module.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Comments to this Manuals