Dell Inspiron P04E001 Setup Guide download pdf (Page 21)

Back to Contents Page

 Processor Heat Sink

Dell™Inspiron™17ServiceManual

Removing the Processor Heat Sink

Replacing the Processor Heat Sink



Removing the Processor Heat Sink



1. Follow the procedures in Before You Begin.



2. Follow the procedures from step 2 to step 17 in Removing the System Board.



3. Disconnect the fan cable from the connector on the system board.



4. Turn the system board over and in sequential order (indicated on the processor heat sink) loosen the five captive screws that secure the processor heat

sink to the system board.



5. Lift the processor heat sink off the system board.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the processor

heat sink.

CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™

is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the

computer.

fan cable connector

processor heat sink

system board



NOTE: The location of the screws may change according to the display adapter supported by your computer.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Comments to this Manuals

No comments

Dell Inspiron P04E001 Setup Guide Page 21

Comments to this Manuals

Related products and manuals for Laptops Dell Inspiron P04E001