Dell Latitude E6400 XFR (Mid 2008) User Manual download pdf (Page 38)

Dell

™

Latitude™ E6400 XFR Service Manual

Page 38

CAUTION: Before you begin any of the procedures in this section, follow the safety

instructions that shipped with your computer.

1. Connect the coin-cell battery cable to the system board.

2. Insert the coin-cell battery into the computer:

If you are installing the same coin-cell battery you removed, slide the battery under the tab, then press down

to seal the tape on bottom.

If you are installing a new coin-cell battery, first remove the adhesive backing paper from the coin-cell

battery. Slide the battery under the tab, then press down to seal the tape on bottom.

1 Coin-cell battery

Coin-cell battery cable

3. Replace the bottom access panel (see Replacing the Bottom Access Panel).

4. Follow the procedures in After Working on Your Computer

15 LED Cover

15.1 Removing the LED Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety

instructions that shipped with your computer.

1. Follow the procedures in Before Working on Your Computer

2. Remove the two M2.5 x 5-mm screws from the top of the LED cover.

3. There are 5 hooks on the bottom of the LED cover.

4. To release hook 1, gently push the LED cover from right to the left.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 72 73

No comments

Dell Latitude E6400 XFR (Mid 2008) User Manual Page 38