Dell B3460DN Mono Laser User's Guide download pdf (Page 143)

Repeating defects appear on prints

Action Yes No

Step 1

Measure the distance between the defects.

Check for a distance between the defects that equals:

• 97 mm (3.82 in.)

• 47 mm (1.85 in.)

• 38 mm (1.5 in.)

Is the distance between defects equal to one of the listed measurements?

Go to step 2.

1 Check if the

distance between

the defects equal

to 80 mm (3.15 in.)

2 Take note of the

distance, and then

contact

technical

support or your

Dell printer dealer.

Step 2

Replace the imaging unit, and then resend the print job.

Do the repeating defects still appear?

Contact

technical

support or your Dell

printer dealer.

The problem is solved.

Print is too dark

Action Yes No

Step 1

a From the Quality menu on the printer control panel, reduce the toner

darkness.

Note: 8 is the factory default setting.

b Resend the print job.

Is the print still too dark?

Go to step 2. The problem is solved.

Troubleshooting 143

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 164 165

No comments

Dell B3460DN Mono Laser User's Guide Page 143