Dell 1350 Color User's Guide download pdf (Page 197)

100

101

Print Media Guidelines 195

– Use metal clasps, string ties, or metal folding bars

– Have an interlocking design

– Have postage stamps attached

– Have nicked edges or bent corners

– Have rough, cockle, or laid finishes

Labels

Your printer can print on many labels designed only for use with laser printers.

When selecting labels:

• Label adhesives, face sheet (printable stock), and topcoats must be able to

withstand temperatures of 205°C (401°F) and pressure of 25 pounds per

square inch (psi).

• Use labels that can be without sealing, excessive curling, wrinkling, or

releasing hazardous emissions.

• Do not use label sheets with a slick backing material.

NOTICE: Before buying large quantities of any print media, it is recommended that

you try a sample first.

When printing on labels:

• Use labels that can withstand temperatures of 205°C (401°F) without

sealing, excessive curling, wrinkling, or releasing hazardous emissions.

• Set the paper type to Label from the printer driver.

• Do not load labels together with paper in the same tray.

• Do not print within 1 mm (0.04 inches) of the die-cut.

• Do not print within 1 mm (0.04 inches) of the edge of the label, of the

perforations, or between die-cuts of the label.

• Do not print a label through the printer more than once.

• Portrait orientation is preferred, especially when printing bar codes.

• Do not use labels that have exposed adhesive.

• Use full label sheets. Partial sheets may cause labels to peel off during

printing, resulting in a jam.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 521 522

Comments to this Manuals

No comments

Dell 1350 Color User's Guide Page 197

Comments to this Manuals

Related products and manuals for Multifunctionals Dell 1350 Color