Dell Precision 330 User's Guide download pdf (Page 2)

Back to Contents Page

AGPCardBrace(MiniTowerChassisOnly)

DellPrecision™WorkStation330SystemsServiceManual

Removing the AGP Card Brace

Replacing the AGP Card Brace

Removing the AGP Card Brace

To access some components on the system board in the mini tower chassis, you may need to remove the accelerated graphics port (AGP) card brace.

1. Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.

2. Lay the computer down on its right side.

3. Remove the screw that secures the AGP card brace to the chassis (see the following figure).

Removing the AGP Card Brace (Mini Tower Chassis)



4. Rotate the brace up until it disengages from the card guide at the front of the chassis. Then lift the brace away from the chassis.

Replacing the AGP Card Brace

To replace the AGP card brace, perform the removal procedure in reverse.

Back to Contents Page

CAUTION: Before you perform this procedure, see "Precautionary Measures."

1 2 3 4 5 6 7 ... 71 72

No comments

Dell Precision 330 User's Guide Page 2