About Your System Board
DellPrecision™T5500ServiceManual
System Board Schematic
Clearing Forgotten Passwords
Clearing CMOS Settings
System Board Schematic
Clearing Forgotten Passwords
1. Remove the computer cover.
2. Locate the 4-pin password connector (PSWD) on the system board.
3. Remove the 2-pin jumper plug from pins 3 and 4 and set the jumper plug aside.
4. Replace the computer cover.
5. Connect your keyboard and mouse, then connect your computer and monitor to electrical outlets and turn them on.
6. After the operating system loads, turn the computer off.
Main Power Connector (POWER1)
Type A USB Port (INT_USB2)
SATA Connectors (SATA0-4)
Hard Drive Fan Connector (FAN_HDD)
>Primary Processor Connector (CPU1)
Power Connector (POWER_CPU1)
Front Panel Connector (FRONTPANEL)
Front Fan Connector (FAN_FRONT)
Chassis Intrusion Header (INTRUDER)
Memory Module Connectors (DIMM1-6)
Optional Serial/PS2 Connector (SERIAL2)
PCI Express 2.0 x16 Card Slot (SLOT4)
Auxiliary Hard-drive LED Connector (AUX_LED)
PCI Express 2.0 x16 Card Slot, wired as x8 (SLOT3)
PCI Express 2.0 x16 Card Slot (SLOT2)
Internal Speaker Connector (INT_SPKR)
PCI Express 2.0 x16 Card Slot, wired as x8 (SLOT1)
Front Panel Audio Connector (FP_AUDIO)
RTC Reset Jumper (RTCRST)
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Comments to this Manuals