Dell PowerEdge C8000 User Manual Page 174

  • Download
  • Add to my manuals
  • Print
  • Page
    / 294
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 173
174 Using the System Setup Program
PMC PDU
Firmware
Version
read-only string v PDU firmware version
PDU Serial
Number
read-only string v PDU serial number,
only supports when
PDU version is
6.00.05 or later
PDU State read-only values:
ok, error,
bootLoader
vPDU state
PDU Power
State
read-write values:
on/off
vPDU power state
PDU Default
Power State
read-write values:
on/off
v PDU Default Power
State
PDU Power
Consumption
read-only integer v Total PSU power,
Unit:W
pmc Initiate
Upload
read-write vaules:
pmc, config,
pdu, psu1,
psu2,
psu3, psu4,
psu5, psu6
vvInitiate upload
pmc psu
Configuration
read-write values:
x4n2, x5n1
v PSU configuration,
x4n2: X+N=4+2
x5n1: X+N=5+1
Table 2-24. PMC SNMP MIB
Category Object Name Read/Write Value Type Operation
FW
Safe
Boot FW
Note
Page view 173
1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 293 294

Comments to this Manuals

No comments