Dell PowerEdge C8000 User Manual download pdf (Page 268)

268 Troubleshooting

Remove the sled from the enclosure. See "Removing a Compute Sled" on

page 192. See the compute sled’s documentation for more information.

Check the memory channels and ensure that they are populated correctly.

Reseat the memory modules in their sockets. See the compute sled’s

documentation for more information.

Reinstall the sled into the enclosure.

Turn on the sled and attached peripherals.

Enter the System Setup program and check the system memory settings.

See "Main Menu" on page 74.

If the problem is not resolved, proceed with the next step.

Turn off the sled and attached peripherals.

Remove the sled from the enclosure.

If a diagnostic test or error message indicates a specific memory module as

faulty, swap or replace the module.

To troubleshoot an unspecified faulty memory module, replace the

memory module in the first DIMM socket with a module of the same type

and capacity. See the compute sled’s documentation for more information.

Reinstall the sled into the enclosure.

Turn on the sled and attached peripherals.

As the system boots, observe any error message that appears and the

diagnostic indicators on the front of the system.

If the memory problem is still indicated, repeat step 11 through step 17 for

each memory module installed.

If the problem persists after all memory modules have been checked, see

"Getting Help" on page 289.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 293 294

No comments

Dell PowerEdge C8000 User Manual Page 268