Dell PowerEdge R210 II User Manual download pdf (Page 72)

72 Installing System Components

Figure 5-12. Removing and Installing a Memory Module

Align the memory module's edge connector with the alignment key of the

memory module socket, and insert the memory module in the socket.

NOTE: The memory module socket has an alignment key that allows you to

install the memory module in the socket in only one way.

Press down on the memory module with your thumbs to lock the memory

module into the socket.

When the memory module is properly seated in the socket, the ejectors on

the memory module socket align with the ejectors on the other sockets

that have memory modules installed.

Repeat step 5 through step 8 of this procedure to install the remaining

memory modules. See

Ta b le 5 -1

Replace the

cooling

shroud. See "Installing the Cooling Shroud" on

page 69.

Close the system. See "Closing the System" on page 51.

Start up the system, press <F2> to enter the System Setup program, and

check the

System Memory

setting on the main System Setup screen.

1 memory module 2 memory module socket ejectors (2)

3 alignment key

book.book Page 72 Friday, March 7, 2014 1:35 PM

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 125 126

No comments

Dell PowerEdge R210 II User Manual Page 72