Installing System Components 123
5
Disconnect all of the cables connected to the SATA backplane including
the SATA A cable, SATA B cable used for 3.5 inch hard drives, the
backplane power cable, and the data cable. See Figure 3-23.
6
To remove the SATA backplane, pull the blue release pin and slide the
backplane upwards.
7
Pull the backplane away from the front of the system until the securing
slots are free from the tabs on the chassis.
Figure 3-23. Removing and Installing a SATA Backplane
1 power cable 2 SATA A cable
3 blue release pin 4 J_planar cable
5 SATA backplane 6 hard drive
book.book Page 123 Monday, August 9, 2010 3:07 PM
Comments to this Manuals