Dell PowerVault NX200 User Manual Page 38
- Page / 166
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
38 About Your System
Caution!
NVRAM_CLR jumper
is installed on
system board
NVRAM_CLR jumper is
installed in the clear setting.
CMOS has been cleared.
Move the NVRAM_CLR
jumper to the default
position (pins 3 and 5).
SeeFigure6-1 for jumper
location. Restart the
system and re-enter
the BIOS settings. See
"Using the System Setup
Program and UEFI Boot
Manager" on page 51.
CPU set to
minimum
frequency.
The processor speed may be
intentionally set lower for
power conservation.
If not an intentional setting,
check any other system
messages for possible causes.
CPU x installed
with no memory.
Memory modules are
required but not installed in
the indicated processor’s
memory slots.
Install memory modules for
the processor. See
"Expansion Cards" on
page 103.
Current boot mode
is set to UEFI.
Please ensure
compatible
bootable media is
available. Use
the system setup
program to change
the boot mode as
needed.
The system failed to boot
because UEFI boot mode
is enabled in BIOS and
the boot operating system
is non-UEFI.
Ensure that the boot mode
is set correctly and that
the proper bootable media
is available. See "Using the
System Setup Program and
UEFI Boot Manager" on
page 51.
Decreasing
available memory
Faulty or improperly
installed memory modules.
Reseat the memory modules.
See "Troubleshooting System
Memory" on page 137.
Table 1-2. System Messages
(continued)
Message Causes Corrective Actions
book.book Page 38 Monday, August 9, 2010 3:07 PM
- Hardware Owner’s 1
- Notes, Cautions, and Warnings 2
- Contents 3
- 4 Contents 4
- 6 Contents 6
- 8 Contents 8
- 10 Contents 10
- About Your System 11
- 12 About Your System 12
- LCD Panel Features 14
- Home Screen 15
- Setup Menu 16
- View Menu 17
- 18 About Your System 18
- 20 About Your System 20
- NIC Indicator Codes 21
- Power Supply Indicator Codes 22
- LCD Status Messages 23
- 24 About Your System 24
- (continued) 25
- 26 About Your System 26
- 28 About Your System 28
- 30 About Your System 30
- 32 About Your System 32
- 34 About Your System 34
- System Messages 36
- 38 About Your System 38
- 40 About Your System 40
- 42 About Your System 42
- MEMTEST lane 42
- 44 About Your System 44
- 48 About Your System 48
- 50 About Your System 50
- Warning Messages 51
- Diagnostics Messages 51
- Alert Messages 51
- Choosing the System Boot Mode 53
- Responding to Error Messages 54
- System Setup Options 55
- Memory Settings Screen 57
- Processor Settings Screen 58
- SATA Settings Screen 58
- Boot Settings Screen 59
- Integrated Devices Screen 60
- PCI IRQ Assignment Screen 61
- Serial Communication Screen 61
- Power Management Screen 62
- System Security Screen 63
- Exit Screen 65
- UEFI Boot Manager Screen 66
- UEFI Boot Settings Screen 67
- System Utilities Screen 67
- Using the System Password 68
- Using the Setup Password 70
- Embedded System Management 71
- Entering the BMC Setup Module 72
- Front Bezel 77
- Front Bezel Inserts 78
- EMI Filler Panel 79
- 1 EMI filler panel 80
- Opening the System 81
- Closing the System 82
- Expansion Card Stabilizer 83
- Cooling Shroud 84
- Installing the Cooling Shroud 85
- Hard Drives 86
- Installing a Hard-Drive Blank 87
- Optical Drives 92
- Installing an Optical Drive 93
- Power Supply 96
- Installing a Power Supply 97
- System Fan 98
- Installing the System Fan 99
- System Memory 100
- Mode-Specific Guidelines 101
- Installing Memory Modules 102
- Removing Memory Modules 104
- Expansion Cards 105
- Installing an Expansion Card 106
- Removing an Expansion Card 109
- Internal USB Memory Keys 112
- Processor 114
- Installing a Processor 117
- System Battery 118
- Chassis Intrusion Switch 120
- Control Panel Assembly 122
- SATA Backplane 124
- System Board 126
- Installing the System Board 128
- Installing System Components 130
- Troubleshooting Your System 131
- Troubleshooting a USB Device 132
- Troubleshooting a NIC 133
- Troubleshooting a Wet System 134
- Troubleshooting a Fan 138
- Troubleshooting System Memory 139
- Troubleshooting a Hard Drive 143
- Troubleshooting the Processor 146
- Using Online Diagnostics 149
- Using the Custom Test Options 151
- Jumpers and Connectors 153
- System Board Connectors 154
- 154 Jumpers and Connectors 156
- Getting Help 159
- 158 Getting Help 160
- Index 159 161
- Index 160 162
- Index 161 163
- Index 162 164
- Index 163 165
- 164 Index 166
Related products and manuals for Computer hardware Dell PowerVault NX200
Computer hardware Dell PERC 4/SI User Manual
(76 pages)
(76 pages)
(14 pages)© 2020, manymanuals.com. All rights reserved. | 0.108 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals