Dell PowerVault TL4000 User Manual download pdf (Page 82)

Minimum Prerequisites for Library Managed Encryption (LME) - LTO 5:

v SAS and Fibre Channel LTO Ultrium 5 Tape Drive

v Ultrium 5 Tape Cartridge

v Library firmware level 9.00 or higher

v Drive firmware level BBNE/BBNF or higher, for reference go to

http://support.dell.com.

v Encryption Key Manager application (IBM SKLM)

Minimum Prerequisites for Library Managed Encryption (LME) - LTO 4:

v SAS and Fibre Channel LTO Ultrium 4 Tape Drive

v Ultrium 4 Tape Cartridge

v Library firmware level 5.80 or higher

v Drive firmware level 77BE or higher

v Encryption Key Manager application (IBM SKLM)

Setting a Drive's Method of Encryption

1. Click Configure Library > Encryption in the left navigation panel.

2. On the Encryption screen, enter the Feature Activation Key to make available

the library managed encryption options.

3. Click Activate to save the key and expand the screen for additional encryption

settings.

4. Select Enable SSL for EKM to enable Secure Sockets Layer for the IBM SKLM

application.

5. Select an Encryption method for each logical library.

v Without an encryption license key, select None or Application Managed

Encryption.

v With an encryption license key, select Library Managed Encryption.

6. Select an Encryption policy for each logical library.

v Encrypt All: This is the default policy. It encrypts all cartridges using the

default data keys specified in the key manager. This setting applies to all

drives in a TL2000/TL4000 logical library.

a77ug199

Figure 4-29. Feature Activation Key screen

a77ug192

Figure 4-30. Configure Library: Encryption Activation screen

4-28 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 305 306

No comments

Dell PowerVault TL4000 User Manual Page 82