ISA expansion-card connector data width (maximum)
ECC or non-ECC SDRAM modules
10 ns (supports 4 clocks only)
NOTE: Only 100-MHz DIMMs are supported. The system can include both ECC and non-ECC memory; however, to support ECC, all
installed DIMMs must be ECC-capable. ECC DIMMs have an odd number of memory chips on the module and non-ECC DIMMs have
an even number of chips.
Externally accessible bays
five total: two 5.25-inch bays for diskette, tape, or CD-ROM drives; three 3.5-
inch bays for diskette or tape drives
Internally accessible bays
two bays for 1-inch-high EIDE or SCSI hard-disk drives
Desktop chassis (available only in certain locations):
Externally accessible bays
four total: two 5.25-inch for diskette, tape, or CD-ROM drives; two 3.5-inch bays
for diskette or tape drives
Internally accessible bays
two bays for 1-inch-high EIDE or SCSI hard-disk drives
9-pin connector; 16550C-compatible
25-hole connector (bidirectional)
15-hole connector on an AGP video card
three miniature jacks for LINE IN, LINE OUT, and MIC IN
two USB-compliant connectors
Comments to this Manuals