Dell OptiPlex G1 User Manual download pdf (Page 25)

Removing and Replacing Parts: Dell OptiPlex GX1 Systems Service Manual

file:///C|/infodev/2013/eDoc/OpGX1/SM/remsff.htm[2/21/2013 11:45:32 AM]

to Not Detected.

See the User's Guide for detailed information on the chassis intrusion detector.

NOTE: If a setup password has been assigned by someone else, contact your network administrator

for information on resetting the chassis intrusion detector.

DIMMs

Figure 26. DIMM Removal

1 Ejectors (2)

CAUTION: Use a wrist grounding strap as explained in "Precautionary Measures."

To remove a DIMM, perform the following steps:

1. Push outward on the two DIMM socket ejectors simultaneously until the DIMM is released from its

socket.

2. Lift the DIMM away from the socket.

To install a DIMM, press the DIMM fully into the socket while closing the ejectors to lock the DIMM into the

socket (see Figure 27).

Figure 27. DIMM Installation

1 Ejectors (2)

2 Notches (2)

1 2 ... 20 21 22 23 24 25 26 27 28 29

No comments

Dell OptiPlex G1 User Manual Page 25