Dell T620 Owner's Manual Page 121

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 120
3. Connect the LCD cable, the control panel cable and the control panel USB cable.
4. Install the control panel assembly.
5. Install the system top cover. See Installing The System Top Cover.
6. Install the system left side cover. See Installing The System Left Side Cover.
7. Close the system.
8. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
9. If applicable, install the front bezel.
Removing The LCD Module—Rack Mode
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. If installed, remove the front bezel.
2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
3. Remove the system from the rack.
4. Remove the system left side cover. See Removing The System Left Side Cover.
NOTE: The LCD module is located on the left side panel.
5. Remove the screw securing the module to the chassis from the left side of the chassis.
CAUTION: Do not use excessive force when removing the LCD module as it can damage the connectors.
6. Pull the LCD module turning it at an angle to release it from the side panel.
121
Page view 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 163 164

Comments to this Manuals

No comments