Dell PowerEdge R905 Owner's Manual download pdf (Page 21)

About Your System 21

LCD Status Messages

The system's control panel LCD provides status messages to signify when the

system is operating correctly or when the system needs attention.

The LCD lights blue to indicate a normal operating condition, and lights

amber to indicate an error condition. The LCD scrolls a message that

includes a status code followed by descriptive text. Table 1-7 lists the LCD

status messages that can occur and the probable cause for each message. The

LCD messages refer to events recorded in the System Event Log (SEL). For

information on the SEL and configuring system management settings, see

the systems management software documentation.

CAUTION: Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your

product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered

by your warranty. Read and follow the safety instructions that came with the

product.

NOTE: If your system fails to boot, press the System ID button for at least five

seconds until an error code appears on the LCD. Record the code, then see "Getting

Help" on page 181.

Table 1-6. NIC Indicator Codes

Indicator Indicator Code

Link and activity indicators are off The NIC is not connected to the network.

Link indicator is green The NIC is connected to a valid link partner on

the network.

Activity indicator is blinking amber Network data is being sent or received.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 201 202

No comments

Dell PowerEdge R905 Owner's Manual Page 21