Dell PowerEdge R905 Owner's Manual download pdf (Page 67)

Installing System Components 67

To replace the optional bezel, hook the right end of the bezel onto the chassis,

then fit the free end of the bezel onto the system. Secure the bezel with the

keylock. See Figure 3-2.

Opening and Closing the System

CAUTION: Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your

product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered

by your warranty. Read and follow the safety instructions that came with the

product.

CAUTION: Whenever you need to lift the system, get others to assist you. To avoid

injury, do not attempt to lift the system by yourself.

Opening the System

Unless you are installing a hot-plug component such as a cooling fan or

hard-disk drive, turn off the system and attached peripherals, and

disconnect the system from the electrical outlet and peripherals.

Rotate the latch release lock on the latch in a counter clockwise direction

to the unlocked position. See Figure 3-3.

Lift up on the latch on top of the system and slide the cover back. See

Figure 3-3.

Grasp the cover on both sides and carefully lift the cover away from the

system.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 201 202

No comments

Dell PowerEdge R905 Owner's Manual Page 67