Dell PowerEdge 4400 User Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 89
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
Back to Contents Page
I/O Ports and Connectors: Dell™PowerEdge™4400SystemsUser'sGuide
Overview
This section provides specific information about the input/output (I/O) ports and connectors on the back panel of the computer.
I/O Ports and Connectors
The I/O ports and connectors on the back panel of the computer are the gateways through which the computer system communicates with external
devices, such as a keyboard, mouse, printer, and monitor. Figure 1 identifies the I/O ports and connectors for your system.
Figure 1. I/O Ports and Connectors
Serial and Parallel Ports
The two integrated serial ports use 9-pin D-subminiature connectors on the back panel. These ports support devices such as external modems,
printers, plotters, and mice that require serial data transmission (the transmission of data one bit at a time over one line).
Most software uses the term COM (for communications) plus a number to designate a serial port (for example, COM1 or COM2). The default
designationsofyourcomputer'sintegratedserialportsareCOM1andCOM2.COM1isthebottomconnector;COM2isonthetop.
The integrated parallel port uses a 25-pin D-subminiature connector on the computer's back panel. This I/O port sends data in parallel format
(where eight data bits, or one byte, are sent simultaneously over eight separate lines in a single cable). The parallel port is used primarily for
printers.
Most software uses the term LPT (for line printer) plus a number to designate a parallel port (for example, LPT1). The default designation of the
computer's integrated parallel port is LPT1.
Port designations are used, for example, in software installation procedures that include a step in which you identify the port to which a printer is
attached, thus telling the software where to send its output. (An incorrect designation prevents the printer from printing or causes scrambled print.)
Adding an Expansion Card Containing Serial or Parallel Ports
Overview
Video Connector
I/O Ports and Connectors
USB Connectors
Serial and Parallel Ports
Integrated Network Interface Controller Connector
Keyboard and Mouse Connectors
1
Mouse connector
2
Keyboard connector
3
USB connectors (2)
4
NIC connector
5
Serial port 1 connector
6
Parallel port connector
7
Serial port 2 connector
8
Video connector
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 88 89

Comments to this Manuals

No comments