Dell PowerEdge R210 II User Manual download pdf (Page 21)

About Your System 21

PCIe Training

Error: Expected

Link Width is x,

Actual Link

Width is y.

Faulty or improperly

installed PCIe card in the

specified slot.

Reseat the PCIe card in the

specified slot number. See

"Troubleshooting an

Expansion Card" on

page 109. If the problem

persists, see "Getting Help"

on page 119.

SATA Portx

device not

found.

There is no device connected

to the specified SATA port.

Information only.

SATA port x

device auto-

sensing error.

SATA port x

device

configuration

error.

SATA port x

device error.

The drive connected to the

specified SATA port is faulty.

Replace the faulty drive.

The amount of

system memory

has changed.

Memory has been added or

removed or a memory

module may be faulty.

If memory has been added or

removed, this message is

informative and can be

ignored. If memory has not

been added or removed,

check the SEL to determine

if single-bit or multi-bit

errors were detected and

replace the faulty memory

module. See

"Troubleshooting System

Memory" on page 104.

Time-of-day not

set - please run

SETUP program.

Incorrect Time or Date

settings; faulty system

battery.

Check the Time and Date

settings. See "Using the

System Setup Program and

Boot Manager" on page 25. If

the problem persists, replace

the system battery. See

"System Battery" on page 89.

Message Causes Corrective Actions

book.book Page 21 Friday, March 7, 2014 1:35 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 125 126

Comments to this Manuals

No comments