Dell PowerEdge R300 User Manual download pdf (Page 51)

Using the System Setup Program 51

Memory Information Screen

Table 2-3 lists the descriptions for the information fields that appear on the

Memory Information screen.

Serial Communication Displays a screen to configure serial communication,

external serial connector, fail-safe baud rate, remote

terminal type, and redirection after boot.

Embedded Server

Management

Displays a screen to configure the front-panel LCD options

and to set a user-defined LCD string.

System Security Displays a screen to configure the system password and

setup password features. See Table 2-8. For further

information, see "Using the System Password" on page 59

and "Using the Setup Password" on page 61.

Keyboard NumLock

(On default)

Determines whether your system starts up with the

NumLock mode activated on 101- or 102-key keyboards

(does not apply to 84-key keyboards).

Report Keyboard Errors

(Report default)

Enables or disables reporting of keyboard errors during the

POST. Select Report for host systems that have keyboards

attached. Select Do Not Report to suppress all error

messages relating to the keyboard or keyboard controller

during POST. This setting does not affect the operation of

the keyboard itself if a keyboard is attached to the system.

Table 2-3. Memory Information Screen

Option Description

System Memory Size Displays the amount of system memory.

System Memory Type Displays the type of system memory.

System Memory Speed Displays the system memory speed.

Video Memory Displays the amount of video memory.

System Memory Testing Specifies whether system memory tests are run at system

boot. Options are Enabled and Disabled.

Table 2-2. System Setup Program Options (continued)

Option Description

book.book Page 51 Sunday, June 21, 2009 5:16 PM

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 185 186

No comments

Dell PowerEdge R300 User Manual Page 51